Reconditioned N12B14A engine without attachments

€3.199,00
Refurbished

Delivery time: 14–21 working days, depending on the work required

The price includes a 300 euro deposit on the old engine. A deposit voucher is enclosed with this parcel; please complete it and return it to us along with the old engine, and we will refund 300 euros. For an additional charge, we can also arrange for the engine to be collected.
We ship our engines without valve covers; if desired, they can be ordered pre-installed.
Item price
Options (deposit, etc.)
Grand total

Delivery time: 14–21 working days, depending on the work required

Description

High-quality reconditioned engine without ancillary components for the MINI with engine code N12B14A. This engine has been fully reconditioned and meets the highest quality standards. We offer a 12-month warranty on this engine, so you can hit the road with complete peace of mind.

Reconditioning details:

  • Engine block: Honed and planed.
  • Internal components: New piston rings, bearings, timing chain, Vanos, as well as various bolts and seals.
  • Cylinder head: Planed, valves pressed out, valves ground, seats milled, valve guides replaced.
  • Quality assurance: Carefully inspected and overhauled by our experienced specialists.

Important notes:

  • The engine is supplied without any fitted parts.
  • The price includes a €300 deposit on the old engine, which will be refunded to you as soon as the old engine arrives at our premises and is assessed as repairable.

Return of the old engine:
Your old engine must be complete, just as the one we supplied, in order to receive a refund of the deposit. Once it has been checked for repairability, the refund will be processed quickly and easily.

Advantages of a reconditioned engine:

  • Cost savings: Significantly cheaper than a new engine.
  • Environmentally friendly: Sustainable use through reconditioning.
  • High-performance: Improved and optimised performance thanks to careful reconditioning.

Installation note:
We recommend having the installation carried out by a qualified specialist workshop to safeguard your warranty claims and ensure fault-free operation. Of course, we can also replace the engine directly on site for an additional charge; please contact us before placing your order.

Contents of delivery:

  • Reconditioned engine without fittings.

Order now and benefit from a reconditioned motor with top performance and our 12-month warranty!

If you have any further questions about this motor, our customer service team will be happy to help.

You can find further information on motor reconditioning in our glossary.

Product details

Miniparts24
Part number:
N12B14A
Condition:
Refurbished
Comparison numbers:
N12B14A
Category:
Engine
Models:
R55, R56, R57, R58, R59, R60, R61

Product safety

Manufacturer information

Miniparts24
Euregiostraße 13
48465 Schüttorf

Product safety documents

Safety instructions

Before the engine is fitted, a number of important preparatory steps are required. These steps are designed to ensure the engine starts successfully and has a long service life:

  • All fitted components, such as fuel injectors, turbochargers, sensors, control units, etc., must be in perfect condition. Defective or contaminated old parts can lead to serious damage.
  • The cause of any engine damage to the old unit (e.g. low oil level, overheating, timing errors) must be identified and rectified before the new engine is fitted.
  • The vehicle’s oil and cooling systems should be cleaned or flushed before installation to remove any residues.
  • Sensors such as the crankshaft or camshaft sensor should be checked for proper function and cleanliness.

Initial commissioning

The initial start-up of the engine is a particularly critical stage. Proceed as follows:

  • Use fresh engine oil and a new oil filter.
  • Before starting, the engine should be cranked over without ignition or fuel injection. This can be achieved by deactivating the ignition or fuel injection system. The aim is to build up oil pressure before the engine runs.
  • Only then should you start the engine as normal and let it run whilst stationary. It is important that the engine is not immediately put under load.
  • No test drive, no acceleration, no high revs during this initial phase.
  • After a few minutes, switch off the engine and change the oil and oil filter straight away.

The first service is due after approximately 300 kilometres. The next oil and filter change must be carried out by 1,000 kilometres at the latest.

Failure to follow this procedure may result in the loss of the warranty.

After the first 1,000 kilometres

  • After approximately 1,000 kilometres, another oil and filter change must be carried out.
  • From this point onwards, the vehicle manufacturer’s standard maintenance and service intervals apply.

Further information on the running-in period

  • You should avoid driving at high revs during the first 1,000 kilometres.
  • Full load, towing or other extreme loads must be avoided at all costs.
  • Should problems such as a loss of power, increased oil consumption or smoke development occur, the engine must be switched off immediately and an inspection carried out.

These instructions are intended to protect the engine and ensure its long-term reliability. Failure to comply may invalidate warranty claims.